Dura Blue Wheels

The finest wheel spacers available These spacers are made using an exclusive compound of urethane and titanium The mounting hardware attaches to the existing press-in studs, providing a well supported foundation for the spacer These spacers will provide both wheel clearance and a more stable ride Graph-lite "EZ Fit" spacers do not require stud removal for installation Must be used when access to the inside of the hub is limited Use for superior fit and assembly Sold in pairs (enough for two wheels) Bolt pattern: 4x144 Width: 1.5" Intended for front wheels only Fits the following Honda models:...

Increases front and rear wheel track up to 5" Size: 4x110mm, 1.5" wide Intended to fit 2008 Can Am DS 450 models Sold in pairs (enough for two wheels) Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

This series spacer is the same urethane and titanium compound as the EZ Fit The difference lies in the mounting procedure These spacers require the removal of the press-in studs Long hex bolts insert through the holes, spacers and wheels In order to tighten, the head of the bolt must be accessed NOTE: These spacers will not work where the head of the bolt is hidden, use DuraBlue EZ Fit wheel spacers instead NOTE: Graph-lite "GL" spacers require that the studs be removed from the hub for installation and long "through bolts" (supplied) inserted in the stud hole Sold in pairs (enough for two...

Increases front and rear wheel track up to 5" Size: 4x110mm, 2.5" wide Intended to fit all Honda models with flat nuts Sold in pairs (enough for two wheels) Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Increases front and rear wheel track up to 5" Size: 4x110mm, 2.5" wide Intended to fit all Honda models with tapered nuts Sold in pairs (enough for two wheels) Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Increases front and rear wheel track up to 5" Size: 4x115mm, 2.5" wide Intended to fit all Yamaha models with flat nuts Sold in pairs (enough for two wheels) Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

DuraBlue Bullet Lug-Nut Nut Series gives your machine some extra flash while at the same time protecting your stud threads Take off over a pound of unsprung weight from your quad Lug nuts will fit all wheels with 10mm studs (excludes Polaris models) Sold in an 8 pack Style: Flat