Motion Pro Tools
Filter Products
Sort By
Motion Pro Fork Seal Bullet 46MM Black
Motion Pro - Tools
Lowest Price:
$8.55
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 46mm bullet
Motion Pro Fork Seal Bullet 47MM White
Motion Pro - Tools
Lowest Price:
$8.06
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 47mm bullet
Motion Pro Fork Seal Bullet 47MM White
Motion Pro - Tools
Lowest Price:
$8.55
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 47mm bullet
Motion Pro Master Cylinder Snap Ring Pliers
Motion Pro - Tools
Lowest Price:
$28.17
See Details
Allows removal of internal snap rings used in hydraulic master cylinders Replaces Honda# 07914-SA50001 Can be used to remove and replace small to medium internal snap rings up to 50mm deep, including those used for transmission gear locating, bearing retention, and oil seal retention Applicable to some fork seal retaining rings
Motion Pro T6 Tire Iron/Lever 12/13MM Hex Wrench Combo
Motion Pro - Tools
Lowest Price:
$21.99
See Details
Tire spoon/axle nut hex wrench Lightweight forged 7075 T-6 aluminum Hard anodized finish Under 10 inches in length and weigh only 3.5 oz. Hex wrench sizes fit most popular motorcycle axle nuts Perfect fit for Motion Pro T6 Tool Pack Size: 12/13mm for rim lock nuts (sold separately) Hex ends are rated for a maximum torque of 90 ft-lbs Not recommended for use with Bib Mousse tubes or tire balls
Motion Pro Adapter Kit Air Cooled Engines With 08-0250
Motion Pro - Tools
Lowest Price:
$14.61
See Details
Kit includes an extended thread adapter and dial indicator extension Allows Water-Cooled 2-Stroke Timing Kit Motion Pro P/N 08-0250 to be used on air cooled engines Does not allow two stroke timing kit 08-0250 to be installed on Yamaha RD two stroke twins when the engine is in the frame. This kit along with two stroke timing kit 08-0250 does work with engine out of frame
Motion Pro CR Seal/Bearing Retainer 47MM For Honda CR/CRF
Motion Pro - Tools
Lowest Price:
$17.99
See Details
Versatile design features a 22mm hex and 3/8" square drive Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling For use on 47mm lock rings Replaces OEM tool 07710-0010200, to remove and replace the rear wheel bearing/seal retainer ring, part number 41231-KZ4-000 Fits the following Honda models: CR125R 2000-2007 CR250R 2000-2007 CRF250R 2004-2007 CRF250X 2004-2007 CRF450R 2002-2007 CRF450X 2005-2008
Motion Pro Flywheel Puller M24x1.5 RH For Honda Kawasaki Suzuki Yamaha
Motion Pro - Tools
Lowest Price:
$21.75
See Details
M24X1.5 RH internal flywheel puller Replaces Honda OEM tool 07AMC-MEBA100, Kawasaki OEM tool 57001-1565 and Suzuki OEM tool K5700-11565-LPT Includes 12mm crankshaft protector cap (OE tool 07AMC-MEBA110) Fits the following Honda models: CRF150R 2007-2008 CRF150RB EXPERT 2007-2008 CRF250R 2004-2008 CRF250X 2004-2008 CRF450R 2002-2008 Fits the following Kawasaki models: KX250F 2004-2009 KX450F 2006-2008 Fits the following Suzuki models: RM-Z250 2004-2009 RM-Z450 2005-2007 Fits the following Yamaha models: YZ450F 2006-2008
Motion Pro Fork Seal Bullet 36MM Red
Motion Pro - Tools
Lowest Price:
$8.06
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 36mm bullet
Motion Pro Fork Seal Bullet 36MM Red
Motion Pro - Tools
Lowest Price:
$8.55
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 36mm bullet
Motion Pro Fork Seal Bullet 41MM Blue
Motion Pro - Tools
Lowest Price:
$8.06
See Details
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Includes one 41mm bullet
Motion Pro 5/8" Spark Plug Socket Extension 4-Strokes
Motion Pro - Tools
Lowest Price:
$19.99
See Details
Special thin wall design fits in tight spaces Perfect for use on water-cooled 4-strokes with 5/8" spark plugs Unique 2-step extension - Swivel or fixed 3/8" drive swivel extension can be turned with a Phillips screwdriver, 3/8" ratchet or driver, or 14mm wrench or socket Spark plug socket can be turned with 3/8" driver, 19mm wrench, or 19mm socket Spark plug socket can be used with a screwdriver to hold the front 19mm hex axles on late-model 4-stroke motorcycles
Motion Pro 5/8" Spark Plug Socket Extension 4-Strokes
Motion Pro - Tools
Lowest Price:
$20.56
See Details
Special thin wall design fits in tight spaces Perfect for use on water-cooled 4-strokes with 5/8" spark plugs Unique 2-step extension - Swivel or fixed 3/8" drive swivel extension can be turned with a Phillips screwdriver, 3/8" ratchet or driver, or 14mm wrench or socket Spark plug socket can be turned with 3/8" driver, 19mm wrench, or 19mm socket Spark plug socket can be used with a screwdriver to hold the front 19mm hex axles on late-model 4-stroke motorcycles
Motion Pro Master Link Clip Pliers
Motion Pro - Tools
Lowest Price:
$21.75
See Details
Designed to simplify installation and removal of clip-type master links One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip
Motion Pro T-Stem Spanner 30MM/40MM For Yamaha WR/YZ
Motion Pro - Tools
Lowest Price:
$48.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Yamaha motocross bikes (WR/YZ) and some sportbike applications without removing the handlebars The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps 30mm open end side fits T-Stem nut 40mm spanner side fits slotted spanner nut
Motion Pro Fork ACap Wrench 46/50MM For Honda CR Suzuki RM
Motion Pro - Tools
Lowest Price:
$21.03
See Details
For removing the fork caps on late-model Suzuki RM & Honda CR models Can be used for removal of a compression stack on late-model RMs One end is 46mm, the other is 50mm
Motion Pro Axle Wrench Set 41MM Steel For Honda ATV
Motion Pro - Tools
Lowest Price:
$45.25
See Details
Sold as a set Wrench is relieved for use on the innermost nut during the torque process (cut-out allows it to pass over the jam nut) Made from heat-treated steel Includes a 1/2 in. drive slot for use with a torque wrench or breaker bar 41mm, intended for all Honda ATVs
Motion Pro Axle Wrench Set 41MM Steel For Honda ATV
Motion Pro - Tools
Lowest Price:
$53.03
See Details
Sold as a set Wrench is relieved for use on the innermost nut during the torque process (cut-out allows it to pass over the jam nut) Made from heat-treated steel Includes a 1/2 in. drive slot for use with a torque wrench or breaker bar 41mm, intended for all Honda ATVs
Motion Pro 5MM Cap Brass Vacuum Hose Adapter W/ACAP
Motion Pro - Tools
Lowest Price:
$13.39
See Details
Fits 5mm manifold port 50cm (500mm) long Designed for permanent installation into the vacuum ports on the intake manifold Once installed, the hoses can be routed to an easily accessible location Reduces time necessary for carburetor synchronization
Motion Pro 6MM Cap Brass Vacuum Hose Adapter W/ACAP
Motion Pro - Tools
Lowest Price:
$13.39
See Details
Fits 6mm manifold port 50cm (500mm) long Designed for permanent installation into the vacuum ports on the intake manifold Once installed, the hoses can be routed to an easily accessible location Reduces time necessary for carburetor synchronization
Motion Pro 5MM Carburetor Vacuum Adapter W/Cap Brass
Motion Pro - Tools
Lowest Price:
$7.40
See Details
Can be permanently installed on motorcycles that only have a plug in the vacuum port Eliminates the need to install adapters before every carburetor synchronization Rubber caps are included to seal vacuum
Motion Pro 6MM Carburetor Vacuum Adapter W/Cap Brass
Motion Pro - Tools
Lowest Price:
$7.40
See Details
Can be permanently installed on motorcycles that only have a plug in the vacuum port Eliminates the need to install adapters before every carburetor synchronization Rubber caps are included to seal vacuum
Motion Pro Box Rocker Wrench 3/16 For Harley Davidson Buell
Motion Pro - Tools
Lowest Price:
$17.23
See Details
Designed to reach hard to get 3/16" Allen on the rocker boxes of Harley Davidson Big Twin, Sportster & Buell motorcycles Features a 3/8" drive for use with torque wrench Vinyl cover offers comfort and minimizes chances of damage to finished surfaces
Motion Pro Valve Core Remover/Installer Tool
Motion Pro - Tools
Lowest Price:
$7.43
See Details
Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve) Perfect tool pack accessory
