Cycle Visions Body & Fairings

Machined from 9/16" square steel bar stock - Will accommodate Cycle Visions' Multitude Topper knobs with 3/8"-16 thread (sold separately) - Height: 30" - Bar Width: 6-11/16" - Fits side plates: 6.88" to 7.625" (outside dimensions-narrow) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" square steel bar - Height: 30" - Bar Width: 8-3/4" - Fits side plates: 8.25" to 8.75" (outside dimensions-wide) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" square steel bar - Height: 30" - Bar Width: 6-11/16" - Fits side plates: 6.88" to 7.625" (outside dimensions-narrow) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" square steel bar - Height: 18" - Bar Width: 8-3/4" - Fits side plates: 8.25" to 8.75" (outside dimensions-wide) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" round cold-rolled steel - Height: 18" - Bar Width: 6-11/16" - Fits side plates: 6.88" to 7.625" (outside dimensions-narrow) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" square steel bar - Height: 30" - Bar Width: 8-3/4" - Fits side plates: 8.25" to 8.75" (outside dimensions-wide) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" round cold-rolled steel - Height: 30" - Fits all models - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" round cold-rolled steel - Height: 18" - Bar Width: 8-3/4" - Fits side plates: 8.25" to 8.75" (outside dimensions-wide) - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Machined from 9/16" round cold-rolled steel - Height: 30" - Fits all models - Made in the USA - Please note: Fits all side plates except Plug-N-Play. - Please note: Side plates must be purchased separately. - Please note: For show use ONLY; not designed for passenger support. -

Allow for the installation of FLT/FLST style floorboards on a V-Rod without modifications - Made from steel with a powder-coated finish - Made in the USA - Please note: Floorboards are NOT included and must be purchased separately. For front boards only-rear not available. - Please note: Does not fit Night Rod model VRSCD. - Fits the following Harley Davidson models: - VRSCA 2002-2010 - VRSCB 2002-2010 -

Chrome-plated BareBacks cap - Cover the male end of the BareBack when you take off the saddlebags - Sold individually - Made in the USA -

Fits all FLST Baggers with hard bags - Made of fiberglass with a gray gel coat finish - Complete fender; must be used with Cycle Visions' Bagger Tail Saddlebag Mounts Part #CV-7200A, CV-7205, CV-7201 or CV-7206 (each sold separately) - Requires the use of Cycle Visions' Extended Saddlebags Part #CV7260 or CV7261 (each sold separately) and a long "true dual" Softail exhaust system - Fender features filler panels and recessed pocket for cycle Visions' Eliminator Taillight Part #CV4819 (sold separately) - Will work with detachable sissy bar - Made in the USA - Fits the following Harley...

Allow instant removal of your saddlebags - Remove both the saddlebags and the steel mounting bracket - Will not work with bag guards - All components are made from high-quality 303 stainless steel - For models with detachable sissy bar - US Patent #6,293,450-B1 - Made in the USA - Please note: Not for FXSTD models. - Fits the following Harley Davidson models: - FLSTF 1991-2002 (for OEM accessory leather saddlebags) - FXD 1991-2005 - FXDWG 1991-2005 - FXST 1991-2002 (for OEM accessory leather saddlebags) - FXSTS 1991-2002 -

Allow instant removal of your saddlebags - Remove both the saddlebags and the steel mounting bracket - Will not work with bag guards - All components are made from high-quality 303 stainless steel - US Patent #6,293,450-B1 - Made in the USA - Please note: Not for FXSTD models. - Fits the following Harley Davidson models: - FLSTF 1991-2002 (for OEM accessory leather saddlebags) - FXD 1991-2005 - FXDWG 1991-2005 - FXST 1991-2002 (for OEM accessory leather saddlebags) - FXSTS 1991-2002 -