Electrosport Industries Electrical & Ignition

This is high quality replacement Igniter unit for various Ducati models This igniter is a straight replacement for the stock Kokusan Denki BB1105 units and will fit all Ducati Monster 600, Monster 900, 900SS models that use a separate ignition unit for each cylinder This is a great upgrade as the original Kokusan units used electronics from the early 90s These new igniters have modern and faster switching electronics which will help reach a higher spark voltage These new igniters come with a full one year warranty through Electrosport

PROCOM Map Switching Performance CDI increases the rev limit by 1,000 RPM over the stock rev limit In addition, this unit offers 10 re-mapped timing curves which give a noticeable increase in horsepower and torque over the stock CDI This CDI box is a direct plug in replacement CDI Simply locate and remove the stock CDI, and plug the Procom unit directly into the wiring harness, no modification needed Suitable for stock and modified machines Electrosport covers all their PROCOM Performance CDIs with a full one year warranty through Electrosport Fits the following Yamaha models Warrior 350...

PROCOM Performance CDI increases rev limit 1,000 RPM over the stock (from stock CDI 9,000RPM to Procom CDI 10,000RPM) This unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI This CDI box is a direct plug in replacement CDI Simply locate and remove the stock CDI, and plug the Procom unit directly into the wiring harness, no modification needed Suitable for stock and modified machines All PROCOM Performance CDIs with a full one year warranty through Electrosport.

This PROCOM Performance CDI increases the rev limit by 1,000 RPM over the stock rev limit In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI This CDI box is a direct plug in replacement CDI Simply locate and remove the stock CDI, and plug the Procom unit directly into the wiring harness, no modification needed Suitable for stock and modified machines Note: Fits 2004 Model A04CH50AO/AQ/AR/AS/AT/AV/AW/AX and all 2005-09 models listed Electrosport covers all their PROCOM Performance CDIs with a full one year...

This PROCOM Performance CDI increases the rev limit by 1,000 RPM over the stock rev limit In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI This CDI box is a direct plug in replacement CDI Simply locate and remove the stock CDI, and plug the Procom unit directly into the wiring harness, no modification needed Suitable for stock and modified machines Note: Fits 2003 model A03CH50AA/AB/AC/AD/AE/AH and 2004 Model A04CH50AA/AC/AE/AG only Electrosport covers all their PROCOM Performance CDIs with a full one year...

This PROCOM Performance CDI Box increases the rev limit by 1,000 RPM over the stock rev limit (from stock CDI 7,500RPM to Procom CDI 8,500RPM) In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI This CDI box is a direct plug in replacement CDI Simply locate and remove the stock CDI, and plug the Procom unit directly into the wiring harness, no modification needed Suitable for stock and modified machines Like all PROCOM Performance CDIs this unit also comes with a full one year warranty through Electrosport Fits...

Manufactured using a modern core made from very high grade lamination material for low magnetic losses Uses the highest grade copper wire Wound on ElectroSport's modern winding machines for an optimum winding result Comes with high quality lead wires, rubber seals and connectors and is a plug in replacement Cost effective replacement when the OEM stator has failed, whether the lighting output is needed or not (you can simply leave the lighting output unconnected and it will not affect operation of the ignition side of the stator) Manufacturer's one year warranty

Manufactured using a modern core made from very high grade lamination material for low magnetic losses Uses the highest grade copper wire Wound on ElectroSport's modern winding machines for an optimum winding result Comes with high quality lead wires, rubber seals and connectors and is a plug in replacement Cost effective replacement when the OEM stator has failed, whether the lighting output is needed or not (you can simply leave the lighting output unconnected and it will not affect operation of the ignition side of the stator) Manufacturer's one year warranty Fits the following Honda...

Manufactured using a modern core made from very high grade lamination material for low magnetic losses Uses the highest grade copper wire Wound on ElectroSport's modern winding machines for an optimum winding result Comes with high quality lead wires, rubber seals and connectors and is a plug in replacement Cost effective replacement when the OEM stator has failed, whether the lighting output is needed or not (you can simply leave the lighting output unconnected and it will not affect operation of the ignition side of the stator) Manufacturer's one year warranty Fits the following Honda...

Direct replacement for the OEM ECU unit Simply plug in and the machine will start Ten included fuel/ignition maps that can be selected with the rotary switch at the top of the unit The first map under position "0" is a copy of the stock map with the only difference being the RPM limit being raised another 500 RPM The other nine maps have their own use depending on the conditions that your ATV will be used in Easy to use software that allows full control over the fuel and ignition parameters Adjustments possible between -80%/-30% of the stock fuel map, and +32/-10 degrees of ignition timing at...

Direct replacement for the OEM ECU unit Simply plug in and the machine will start Ten included fuel/ignition maps that can be selected with the rotary switch at the top of the unit The first map under position "0" is a copy of the stock map with the only difference being the RPM limit being raised another 500 RPM The other nine maps have their own use depending on the conditions that your ATV will be used in Easy to use software that allows full control over the fuel and ignition parameters Adjustments possible between -80%/-30% of the stock fuel map, and +32/-10 degrees of ignition timing at...

Manufactured using a modern core made of material that is highly magnetically conductive Uses the highest grade copper wire Wound on ElectroSport's modern winding machines for an optimum winding result Comes with high quality lead wires, rubber seals and connectors and is a plug in replacement Cost effective replacement when the OEM stator has failed, whether the lighting output is needed or not (you can simply leave the lighting output unconnected and it will not affect operation of the ignition side of the stator) Resistance blue/yellow-green: 250 Ohms +/-10%; Resistance blue-white: 7 Ohms...