Motion Pro Tools
Filter Products
Sort By
Motion Pro Stepless Ear Clamp 10.8-13.3MM 10 Piece
Motion Pro - Tools
Lowest Price:
$12.01
See Details
Size range is 10.8 to 1333 mm Narrow 7 mm wide band provides concentrated seal compression 360 degree Stepless design with no gaps on inner surface Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design Tampering is visible Sold in packs of 10 Fits Motion Pro Clear Vinyl fuel line with 1/4 inch ID
Motion Pro Stepless Ear Clamp 10.3-12.8MM 10 Piece
Motion Pro - Tools
Lowest Price:
$12.01
See Details
Size range is 10.3 to 12.8 mm Narrow 7 mm wide band provides concentrated seal compression 360 degree Stepless design with no gaps on inner surface Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design Tampering is visible Sold in packs of 10 Fits Motion Pro Premium fuel line with 1/4 inch ID
Motion Pro Stepless Ear Clamp 12-14.5MM 10 Piece
Motion Pro - Tools
Lowest Price:
$12.01
See Details
Size range is 12.0 to 14.5 mm Narrow 7 mm wide band provides concentrated seal compression 360 degree Stepless design with no gaps on inner surface Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design Tampering is visible Sold in packs of 10 Fits Motion Pro Premium and Clear Vinyl fuel line with 5/16 inch ID
Motion Pro Stepless Ear Clamp 14.8-18MM 10 Piece
Motion Pro - Tools
Lowest Price:
$12.67
See Details
Size range is 14.8 to 18.0 mm Narrow 7 mm wide band provides concentrated seal compression 360 degree Stepless design with no gaps on inner surface Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design Tampering is visible Sold in packs of 10 Fits Motion Pro Premium and Clear Vinyl fuel line with 3/8 inch ID
Motion Pro Stepless Ear Clamp 7.8-9.5MM 10 Piece
Motion Pro - Tools
Lowest Price:
$12.01
See Details
Size range is 7.8 to 9.5 mm Narrow 5 mm wide band provides concentrated seal compression 360 degree Stepless design with no gaps on inner surface Specially formed strip edges reduce the risk of damage to the part being clamped Lightweight design Tampering is visible Sold in packs of 10 Fits Motion Pro Premium and Clear Vinyl fuel line with 3/16 inch ID
Motion Pro O-Clips 5/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.06
See Details
Double ear O-Clips for 3/16" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 7/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.57
See Details
Double ear O-Clips for 1/4" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 7/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.93
See Details
Double ear O-Clips for 1/4" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 1/2" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.06
See Details
Double ear O-Clips for 5/16" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 1/2" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.93
See Details
Double ear O-Clips for 5/16" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 9/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.40
See Details
Double ear O-Clips for 3/8" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 9/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$11.40
See Details
Double ear O-Clips for 3/8" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro O-Clips 5/16" Steel 10 Pack Steel
Motion Pro - Tools
Lowest Price:
$10.93
See Details
Double ear O-Clips for 3/16" hoses Easy to install For low pressure applications Snag free, smooth, polished finish Strong, positive clamping strength without damaged to the hose Simple to remove by clipping an ear Sold in packs of 10
Motion Pro Chain Alignment Tool Blue
Motion Pro - Tools
Lowest Price:
$17.47
See Details
Quick and accurate alignment Tool body clamps squarely to rear sprocket so the alignment rod will indicate sprocket alignment to chain Made in the U.S.A.
Motion Pro T-Stem Spanner 30MM/40MM For Yamaha WR/YZ
Motion Pro - Tools
Lowest Price:
$48.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Yamaha motocross bikes (WR/YZ) and some sportbike applications without removing the handlebars The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps 30mm open end side fits T-Stem nut 40mm spanner side fits slotted spanner nut
Motion Pro Cable Luber Lubricant Injector
Motion Pro - Tools
Lowest Price:
$12.59
See Details
Used to inject lubricant into cable housing Clamps over housing and wire allowing an aerosol can to be connected Once lube runs out the far end, the cable is lubricated Ideal for use with Motion Pro Cable Lube P/N 15-0002
Motion Pro T-Stem Spanner 32MM/46MM Slotted For Honda CR
Motion Pro - Tools
Lowest Price:
$41.88
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Honda motocross bikes (CR) and some sportbike applications without removing the handlebars The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps 32mm open end side fits T-Stem nut 46mm spanner side fits slotted spanner nut
Motion Pro T-Stem Spanner 30MM/40MM For Yamaha WR/YZ
Motion Pro - Tools
Lowest Price:
$41.88
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Yamaha motocross bikes (WR/YZ) and some sportbike applications without removing the handlebars The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps 30mm open end side fits T-Stem nut 40mm spanner side fits slotted spanner nut
Motion Pro T-Stem Spanner 30MM/40MM For Yamaha Motocross/Sportbike
Motion Pro - Tools
Lowest Price:
$39.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Yamaha motocross bikes (WR/YZ) and some sportbike applications without removing the handlebars - The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps - 30mm open end side fits T-Stem nut - 40mm spanner side fits slotted spanner nut -
Motion Pro T-Stem Spanner 32MM/46MM Slotted For Honda Motocross/Sportbike
Motion Pro - Tools
Lowest Price:
$39.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Honda motocross bikes (CR) and some sportbike applications without removing the handlebars - The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps - 32mm open end side fits T-Stem nut - 46mm spanner side fits slotted spanner nut -
Motion Pro Cable Luber Lubricant Injector
Motion Pro - Tools
Lowest Price:
$11.50
See Details
Used to inject lubricant into cable housing - Clamps over housing and wire allowing an aerosol can to be connected - Once lube runs out the far end, the cable is lubricated - Ideal for use with Motion Pro Cable Lube P/N 15-0002 -
Motion Pro Chain Alignment Tool Blue
Motion Pro - Tools
Lowest Price:
$23.30
See Details
Quick and accurate alignment - Tool body clamps squarely to rear sprocket so the alignment rod will indicate sprocket alignment to chain - Made in the U.S.A. -
Motion Pro Stepless Clamps 5 Pack 40.8-44.0MM
Motion Pro - Tools
Lowest Price:
$10.82
See Details
Stepless clamps provide secure 360 degree clamping with no gaps - Specially formed edges reduce risk of damage to hose and hose barb - Narrow band provides concentrated seal compression - NOTE: Clamps require use of Motion Pro pincer tool P/N 12-0024 - Clamp size: 40.8-44mm - Sold in a set of 5 -
Motion Pro Stepless Clamps 10 Pack 32.9-36.1MM
Motion Pro - Tools
Lowest Price:
$14.55
See Details
Stepless clamps provide secure 360 degree clamping with no gaps - Specially formed edges reduce risk of damage to hose and hose barb - Narrow band provides concentrated seal compression - NOTE: Clamps require use of Motion Pro pincer tool P/N 12-0024 - Clamp size: 32.9-36.1mm - Sold in a set of 10 -
