Motion Pro Tools
Filter Products
Sort By
Motion Pro TI ProLight Combo Wrench Set 4 PC Titanium
Motion Pro - Tools
Lowest Price:
$124.99
See Details
These super light wrenches weigh less than one quarter of the weight of standard steel wrenches - Made from tool-grade titanium alloy - Extremely lightweight and compact design is perfect for trail tool packs - Exclusive Motion Pro design for optimized strength and performance - Titanium alloy will never rust or corrode - Ergonomic handle - Laser etched markings for easy identification - 4 piece set includes 8mm, 10mm, 12mm and 14mm size wrenches - Not recommended for everyday shop use -
Motion Pro Adjustable Torque Wrench Adapter 6-19MM
Motion Pro - Tools
Lowest Price:
$48.99
See Details
Torque any fastener with a combination wrench or Allen wrench - Will work with 6mm (1/4") through 19mm (3/4") combination wrenches - Will work with 6mm and 8mm Allen wrenches - Heat-treated steel with a black oxide finish - 3/8" square drive is rated for a maximum torque of 90 ft-lbs -
Motion Pro Dual Drive Ball-END Allen T-Handle Set 4/5/6/8MM Universal
Motion Pro - Tools
Lowest Price:
$45.99
See Details
Use T-handle hex to tighten/loosen fasteners and ball-end hex on shaft for quick installation/removal of fasteners - Ball-end allows for better access to hard to reach Allen-head bolts (up to 25-degree working angle) - Compact 6-3/4" shaft fits in tight spaces and is easy to carry - Chrome-vanadium tool steel shaft and T-handle - Hard nickel-pewter finish - Lifetime warranty - Sizes included in set: 4/5/6/8mm - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
Lowest Price:
$9.37
See Details
Intended to fit Motion Pro 5/16" and 8mm deep well T-Handles - Hard nickel pewter finish - Sold individually - Sizes: 3mm & 4mm hex - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
Motion Pro Mini TRI Drive T-Handle With 8/10/12/13MM Sockets
Motion Pro - Tools
Lowest Price:
$23.98
See Details
1/4" drive has a compact 6" drive shaft length - Compact size for use in tight spaces & easy to carry - Includes 8mm, 10mm, 12mm and 13mm sockets - Use with 1/4” drive sockets, hex drives, crow’s foot, swivels, etc. - Chrome-vanadium tool steel shaft and T-Handle - Hard nickel pewter finish - Sizes included: 8/10/12/13mm -
Motion Pro ATV Axle Wrench Set 45.5MM 56MM For Honda TRX Sport
Motion Pro - Tools
Lowest Price:
$44.99
See Details
Made from heat-treated steel - ATV sets Includes a 1/2”- drive slot for use with a torque wrench or breaker bar - Fitment/Size: 45.5 & 56mm/Most Honda TRX Sport models -
Motion Pro T-Handle Rack Wall Mount Bracket Universal
Motion Pro - Tools
Lowest Price:
$26.69
See Details
For mounting Motion Pro 01-0114 T-handle rack to the side of a toolbox, wall, post or any other flat surface - Features a quick release pin for removing and attaching the T-handle rack - Includes built-in bottle opener - Made from heavy-duty 12 gauge zinc plated steel - Designed for use on Motion Pro’s new one piece T-handle rack -
Motion Pro Hex Pro Metric Wrench Set Chrome Universal
Motion Pro - Tools
Lowest Price:
$78.99
See Details
180 degree swivel head with extra long handle for accessing hard to reach places - Kit includes 3, 4, 5, 6, 8 and 10 mm wrenches - Pivot design allows for easy rotation around obstructions - Pivot design allows you to keep the wrench and fastener engaged when access is limited - Great time saver - Heat treated alloy tool steel - Chrome plated finish - Includes heavy duty folding canvas storage pouch - Takes up less storage space than a typical hex key set -
Motion Pro WP Fork ACAP Wrench Dual Chamber 50MM KTM LATE Models
Motion Pro - Tools
Lowest Price:
$20.99
See Details
50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM's - 12 mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg - Made of billet 6061-T6 and anodized Motion Pro blue - Laser engraved markings with Motion Pro logo - Original Motion Pro design -
Motion Pro Hex Pro SAE Wrench Set Chrome Universal
Motion Pro - Tools
Lowest Price:
$73.99
See Details
180 degree swivel head with extra long handle for accessing hard to reach places - Kit includes 3/16, 7/32, 1/4, 5/16, and 3/8 inch wrenches - Pivot design allows for easy rotation around obstructions - Pivot design allows you to keep the wrench and fastener engaged when access is limited - Great time saver - Heat treated alloy tool steel - Chrome plated finish - Includes heavy duty folding canvas storage pouch - Takes up less storage space than a typical hex key set -
Motion Pro Star Pro Wrench Set Chrome Universal
Motion Pro - Tools
Lowest Price:
$88.99
See Details
180 degree swivel head with extra long handle for accessing hard to reach places - Kit includes T-25, T-27, T-30, T-40, T-45, and T-50 wrenches - Pivot design allows for easy rotation around obstructions - Pivot design allows you to keep the wrench and fastener engaged when access is limited - Great time saver - Heat treated alloy tool steel - Chrome plated finish - Includes heavy duty folding canvas storage pouch - Takes up less storage space than a typical hex key set -
Motion Pro Fork ACap Wrench Dual Chamber 49MM For Honda Yamaha LATE Models
Motion Pro - Tools
Lowest Price:
$20.99
See Details
49 mm, 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamaha's & Honda's (NOTE: 2010 Honda CRF250R models use 08-0236 Fork cap wrench) - 12 mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg - Made of billet 6061-T6 and anodized Motion Pro blue - Laser engraved markings with Motion Pro logo - Original Motion Pro design -
Motion Pro Dual Drive Mini T-Handle 1/4 Inch Universal
Motion Pro - Tools
Lowest Price:
$17.20
See Details
Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners - 1/4" drive has a compact 6-1/2” drive shaft length - For tight access and easy transport - Use with 1/4" drive sockets, hex drives, swivels, etc. - Chrome-vanadium tool steel shaft and T-Handle - Durable nickel pewter finish - Lifetime replacement warranty - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
Motion Pro T-Stem Spanner 30MM/40MM For Yamaha Motocross/Sportbike
Motion Pro - Tools
Lowest Price:
$39.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Yamaha motocross bikes (WR/YZ) and some sportbike applications without removing the handlebars - The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps - 30mm open end side fits T-Stem nut - 40mm spanner side fits slotted spanner nut -
Motion Pro ATV Axle Wrench Set 41MM For Honda
Motion Pro - Tools
Lowest Price:
$44.99
See Details
Made from heat-treated steel - ATV sets Includes a 1/2”- drive slot for use with a torque wrench or breaker bar - Fitment/Size: 41mm/Honda ATVs -
Motion Pro Fork ACap Wrench Dual Chamber 46MM/50MM For Honda CR Suzuki RM
Motion Pro - Tools
Lowest Price:
$25.34
See Details
For removing the fork caps on late-model RMs & CRs - Can be used for removal of a compression stack on late-model RMs - Replaces Suzuki OEM 09941-53630 - One end is 46mm, the other is 50mm - Also fits 2010 Honda CRF250R -
Motion Pro T-Stem Spanner 32MM/46MM Slotted For Honda Motocross/Sportbike
Motion Pro - Tools
Lowest Price:
$39.99
See Details
This thin profile combination wrench has an open end wrench on one end for loosening the T-Stem nut on most late-model Honda motocross bikes (CR) and some sportbike applications without removing the handlebars - The other side of the wrench has a spanner wrench that fits the slotted spanner nut used to set steering stem bearing adjustment. The thin profile of the wrench allows it to be used without removing the triple clamps - 32mm open end side fits T-Stem nut - 46mm spanner side fits slotted spanner nut -
Motion Pro 5/8 IN Spark Plug Socket Extension 4-Strokes
Motion Pro - Tools
Lowest Price:
$26.02
See Details
Special thin wall design fits in tight spaces - Perfect for use on water-cooled 4-strokes with 5/8" spark plugs - Unique 2-step extension - Swivel or fixed - 3/8" drive swivel extension can be turned with a Phillips screwdriver, 3/8" ratchet or driver, or 14mm wrench or socket - Spark plug socket can be turned with 3/8" driver, 19mm wrench, or 19mm socket - Spark plug socket can be used with a screwdriver to hold the front 19mm hex axles on late-model 4-stroke motorcycles -
Motion Pro Spoke Wrench 5.0/7.0MM Chrome Steel Nickel
Motion Pro - Tools
Lowest Price:
$16.08
See Details
Chrome-vanadium tool steel with a hard nickel pewter finish - Square-end openings which grip the spoke nipple on all four sides - Offset slotted ends make it easy and quick to use - 5.0mm and 7.0mm sizes -
Motion Pro Float Bowl Wrench 17MM Aluminum
Motion Pro - Tools
Lowest Price:
$12.01
See Details
Designed to remove 17mm float bowl drain plugs - Made from lightweight 6061 T-6 aluminum - Compact design to carry in your tool pack - 12 point hex and low profile design for tight access -
Motion Pro Dual Drive Mini T-Handle 3/8 Inch Universal
Motion Pro - Tools
Lowest Price:
$18.56
See Details
Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners - 3/8" drive has a compact 7-3/4” drive shaft length - For tight access and easy transport - Use with 3/8" drive sockets, hex drives, swivels, etc. - Chrome-vanadium tool steel shaft and T-Handle - Durable nickel pewter finish - Lifetime replacement warranty - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
Motion Pro 18MM Spark Plug Socket Universal
Motion Pro - Tools
Lowest Price:
$20.99
See Details
Originally designed for Honda XR400R as a trail tool, but fits many models with 18mm plugs - Thin wall design to fit into low clearance plug cavity - Socket can be driven with various tools including the Motion Pro spark plug ratchet wrench, 3/8" ratchet, 13/16" wrench, tool kit bar, or a Phillips screw driver placed through the 8.5mm hole at the top of the socket -
Motion Pro Ball End Allen Wrench Set 9 Piece Black
Motion Pro - Tools
Lowest Price:
$24.66
See Details
Made of chrome-vanadium tool steel - Sizes included 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm (1 each) - Ball end allows for better access to allen-head bolts (up to 25-degree working angle) - Convenient holder included -
Motion Pro T-Handle Socket Wrench 10MM Universal
Motion Pro - Tools
Lowest Price:
$16.71
See Details
T-Handle socket wrench - Size: 10mm - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
