N/a Paughco Axis Tube Bolt Washer Kit For Harley Flst Fxst 86-99
 
Lowest Price:
$33.90 See Details
Two bolts - Two star washers - Fits the following Harley Davidson models: - FLST 1986-1999 - FXST 1986-1999 -
Chrome Paughco Throttle Cable Support Bracket Bendix For Harley
 
Reg:$27.95
Sale: $24.49 See Details
Throttle cable support bracket for Harley Davidson models with Bendix carburetors - Replaces OEM 27459-74 - Sold individually -
Chrome Paughco Straight Fishtail Exhaust Extension 29in Harley-davidson Flht 1985-1994
 
Reg:$159.95
Sale: $133.36 See Details
Fits 1-3/4" pipes - 29" long - Intended for late 1985-1994 Harley Davidson FLHS and FLHT models - Sold individually - Please Note: The image displayed is representative of the item, but may vary depending on your specific model. -
Chrome Paughco Glide Risers 4 Inch For Harley Big Twin Xl
 
Reg:$139.95
Sale: $118.38 See Details
Chrome-plated steel risers - Fits 1" diameter handlebars -
Chrome Paughco Glide Risers 3 Inch For Harley Big Twin Xl
 
Reg:$142.95
Sale: $120.52 See Details
Chrome-plated steel risers - Fits 1" diameter handlebars -
Chrome Paughco Glide Risers 6 Inch For Harley Big Twin Xl
 
Reg:$145.95
Sale: $122.66 See Details
Chrome-plated steel risers - Fits 1" diameter handlebars -
Paughco Flat Rear Fender 6 In Steel Custom Big Twin Silver
 
Reg:$74.95
Sale: $69.15 See Details
Flat fenders are most often used in custom rigid frame applications - Raw steel finish - No belt or chain cutout - Rolled from heavy gauge steel - Ready to install - BIG TWIN (all years; custom) - XL (all years) -
Chrome Paughco Hub Cap For Harley Fxwg Fxst 84-96
 
Reg:$44.95
Sale: $38.19 See Details
Chrome plated small hub cap - Includes spacers - HD #44465-88 - Fits the following Harley Davidson models: - FXWG 1984-1996 - FXST 1984-1996 -
Chrome Paughco Exhaust Port Clamps For Harley Panhead
 
Reg:$24.95
Sale: $23.80 See Details
Replacement exhaust port clamps for Paughco Panhead exhausts - Sold in pairs -
Chrome Paughco Independent Dual Headpipes Harley-davidson Flhs 1985-1994
 
Reg:$457.95
Sale: $352.95 See Details
These headpipe sets will fit all late 1985–1994 Evolution FLT, FLHT, FLHS and FLHR models - Complete your exhaust system by combining these headpipes with Paughco tail pipe extensions or mufflers for these bikes (not included) - 1-3/4" independent duals, includes crossover bracket - Sold as a set -
Bare Metal Paughco Mustang Tank X-wide 3 Gallon Single Bare For Harley Custom
 
Reg:$204.95
Sale: $166.53 See Details
3 gallon capacity - Single cap tank - Features a low tunnel with “horseshoe” front mounting tabs - Early cam-style gas cap bungs and internally threaded bungs on both sides for aftermarket 1/4” petcocks (not included) - Dimensions: 16-1/2” tank length, 10” tank width, 7” tank depth, 16-1/2” tunnel length, 3-1/2” tunnel depth, 2-1/2” tunnel width, 17-1/4” centerline hole-to-hole on mounting brackets - Bare metal finish and pressure tested - Custom applications - Gas cap(s) not included - Gas cap(s) not included -
N/a Paughco Oil Tank Bracket Rear For Harley Flst Fxst 86-99
 
Reg:$44.95
Sale: $38.19 See Details
Rear bracket for Paughco oil tanks - HD #62707-84 - FLST 1984-1999 - FXST 1984-1999 -
N/a Paughco Petcock W Reserve Strat 1 4 Npt 3 16 Hose Barb
 
Reg:$48.95
Sale: $42.20 See Details
1/4" NPT straight petcock with reserve - 3/16" hose barb - For Paughco Extra Narrow Custom Fuel Tank (#59-9203 - sold separately) -
Chrome Paughco Straight Fishtail Exhaust Extension Bracket
 
Reg:$39.95
Sale: $34.87 See Details
This is a single required mounting bracket to install 31" inch Paughco Straight Fishtail Exhaust Extensions P/N 605 on 1995-1999 Harley Davidson FLHT models. You must order one clamp per pipe being replaced.
Bare Metal Paughco Mustang Tank X-narrow 2.4 Single Bare For Harley Custom
 
Reg:$194.95
Sale: $159.04 See Details
Single cap, wide Mustang style tank - 2.4 gallon capacity - Comes with two 1/4” petcock outlets - Horseshoe mounting tab in front - Dimensions: 16-1/2” tank length, 9” tank width, 7” tank depth, 2-1/4” tunnel depth, 2-1/4” tunnel width, 17” centerline hole-to-hole on mounting brackets - Gas cap(s) not included -
Chrome Paughco Independent Dual Headpipes For Harley Flh Flt 95-98
 
Reg:$457.95
Sale: $355.37 See Details
These headpipe sets will fit all 1995–1998 Evolution FLT, FLHT, FLHS and FLHR models - Complete your exhaust system by combining these headpipes with Paughco tail pipe extensions or mufflers for these bikes (not included) - 1-3/4" independent duals, includes crossover bracket - Sold as a set -
Chrome Paughco 2 Into 1 Headpipe Set For Harley Davidson Fl 70-84
 
Reg:$256.95
Sale: $205.05 See Details
Fits 1970–1984 Shovelhead engines in 4-speed swingarm frames with kick or electric start - Accepts the stock kickarm and clears the floorboards and the HD factory highway bars - Complete your exhaust system by combining these headpipes with Paughco tail pipe extensions or mufflers for these bikes (not included) - 1-3/4" -
Chrome Paughco Independent Dual Headpipes For Harley Fl 70-84
 
Reg:$425.95
Sale: $329.60 See Details
Fits 1970–1984 Shovelhead engines in 4-speed swingarm frames with kick or electric start - Accepts the stock kickarm and clears the floorboards and the HD factory highway bars - Complete your exhaust system by combining these headpipes with Paughco tail pipe extensions or mufflers for these bikes (not included) - 1-3/4", includes crossover bracket - Sold as a set -
Chrome Paughco Sissy Bar F Chain Drive Rigid Frames For Harley Davidson
 
Reg:$161.95
Sale: $134.43 See Details
Low style, 40 degree bend - Includes spacers for mechanical brakes - 26" T x 9.75" W -
Chrome Paughco Chain Guard Rigid Frame For Harley 86-03
 
Reg:$58.95
Sale: $54.17 See Details
Thin style - Fits Paughco rigid frame for Sportster - Made in the USA -
Chrome Paughco Shotgun Exhaust Hanger Bracket For Harley Fl 70-84
 
Reg:$43.95
Sale: $37.08 See Details
This is a replacement hanger bracket for use with Paughco Shotgun exhausts on 1970-1984 Harley Davidson FL models.
Chrome Paughco Crankcase Guard For Harley Big Twin 41-84
 
Lowest Price:
$47.18 See Details
Heavy-duty, chrome-plated ribbed style steel replacement - HD#24490-36T - Please note: Will not fit Evolution models. -
Chrome Paughco Crossover Dual Headpipes For Harley Fl 70-84
 
Reg:$499.95
Sale: $384.78 See Details
Fits 1970–1984 Shovelhead engines in 4-speed swingarm frames with kick or electric start - Accepts the stock kickarm and clears the floorboards and the HD factory highway bars - Complete your exhaust system by combining these headpipes with Paughco tail pipe extensions or mufflers for these bikes (not included) - 1-3/4" - Sold as a set -
Bare Metal Paughco Axed Fuel Tank 4.2 Gal Double Bare For Harley 82-94
 
Reg:$204.95
Sale: $168.98 See Details
4.2 gallon capacity - Cam-style gas cap bung but with a late stock-style externally threaded bung on the left side for 22mm aftermarket or H-D petcocks (not included) - Dimensions: 15-3/4” tank length, 13-1/2” tank width, 8-3/4” tank depth, 15-3/4” tunnel length, 2-1/4” tunnel depth, 2-1/4” tunnel width, 14-5/8” centerline hole-to-hole on mounting brackets - Bare metal finish and pressure tested - Gas cap(s) not included -

Title

Text