RWD Body & Fairings

Heavy-gauge steel construction Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Comes undrilled (unless noted) so you can position it to look and work best for your application Made in the USA Width: 4.75" Style: Rambler for 21" wheels Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Heavy-gauge steel construction Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Comes undrilled (unless noted) so you can position it to look and work best for your application Made in the USA Width: 4.75" Style: Rambler for 19" wheels Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Bolts directly to Softail fender mounts (6-7/8” wide) with no spacers required Predrilled, horizontal bolt pattern 4.5” fenders fit a 90/90 tire with a 21” wheel Made in the USA Style: Long, flared NOTE: excludes FXSTD Deuce and FLSTS, FLSTSC & FXSTS Springer models Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Bolts directly to Softail fender mounts (6-7/8” wide) with no spacers required Predrilled, horizontal bolt pattern 4.5” fenders fit a 90/90 tire with a 21” wheel Made in the USA Style: short, flared NOTE: excludes FXSTD Deuce and FLSTS, FLSTSC & FXSTS Springer models Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Bolts directly to Softail fender mounts (6-7/8” wide) with no spacers required Predrilled, horizontal bolt pattern 5.5” fenders fit a 120/70 tire with a 21” wheel Made in the USA Style: Long, flared NOTE: excludes FXSTD Deuce and FLSTS, FLSTSC & FXSTS Springer models Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Bolts directly to Softail fender mounts (6-7/8” wide) with no spacers required Predrilled, horizontal bolt pattern 5.5” fenders fit a 120/70 tire with a 21” wheel Made in the USA Style: Short, flared NOTE: excludes FXSTD Deuce and FLSTS, FLSTSC & FXSTS Springer models Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Heavy-gauge steel construction Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Comes undrilled (unless noted) so you can position it to look and work best for your application Made in the USA Width: 4.75" Style: Duster, for 19"/21" wheels Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Heavy-gauge steel construction Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Comes undrilled (unless noted) so you can position it to look and work best for your application Made in the USA Width: 6.25" Style: Pre-drilled for Harley Davidson FXSTD Deuce models Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Powder-coated on the inside to form a complete seal Uses stock dash Includes fuel gauge bung and filler bung Accepts any L96-10 vented aftermarket cap A new seat or seat nose modification is required Measures 23-1/2”L x 17-1/4”W x 9”H (approximately 5.5 gal.) Made in the USA NOTE: Mounting hardware not included Style: Carb style, not intended for fuel injected models All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems

Rocker rear strutless fender with splash guard included The stock seat will not fit with RWD fender kits, you must use solo seat P/N RWD-50050, sold separately Heavy 16 gauge steel construction Fenders are inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork All fenders must be prefitted before painting Made in the USA Style: Short All fenders are shipped unpainted, image is representative only

Heavy-gauge steel construction Predrilled; no spacers required Feature flat mounting surface for the electronic panel; also includes RWD LED Cat Eye/License Plate/Turn Signal Kit recessed into fender Made in the USA Style: 9-1/2"W with taillight/license plate kit (standard length) Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Heavy-gauge steel construction; available in seven popular widths Intended for Swingarm frames, fender features wiring tubes Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Fenders come undrilled so you can position them to look and work best for your application Made in the USA Width: 9" Length: 43-1/2" Style: Cruiser Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

Heavy-gauge steel construction; available in seven popular widths Intended for Swingarm frames, fender features wiring tubes Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork Fenders come undrilled so you can position them to look and work best for your application Made in the USA Width: 11" Length: 42-1/2" Style: Longshot Please Note: The image displayed is representative of the item, but may vary depending on your specific model.

One-piece tanks feature a 3” stretch Curved bottom for a custom look Includes a raw dash panel that replaces the existing dash Factory sealed powder coat primer on the inside of tanks Accepts late 1996-2010 vented gas caps (sold separately); 2003-later style fuel-injected tanks accept the stock OEM fuel-pump assembly Tanks have an approximate 6-gallon capacity Tanks fit with RWD Profile, ProTour and LoPro seats, sold separately Made in the USA Width: 17-1/2" NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit Gas tank comes unpainted, despite...

One-piece tanks feature a 3” stretch Curved bottom for a custom look Includes a raw dash panel that replaces the existing dash Factory sealed powder coat primer on the inside of tanks Accepts late 1996-2010 vented gas caps (sold separately); 2003-later style fuel-injected tanks accept the stock OEM fuel-pump assembly Tanks have an approximate 6-gallon capacity Tanks fit with RWD Profile, ProTour and LoPro seats, sold separately Made in the USA Width: 20" NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit Gas tank comes unpainted, despite image...