Leo Vince EVO II Round Slip-On Exhaust For Kawasaki Ninja ZX10R 2011-2015

Features

• All-Titanium muffler construction with slash-cut carbon fiber end cap
• CAD/CAM design for precise fit
• Constructed of TIG-welded 304 stainless steel
• Increased horsepower across RPM range (linear power)
• Technical Carbon Fiber muffler straps and end caps
• A deeper exhaust tone at a resonable sound level
• Removable EVOII sound insert for more aggressive tone
• Machine-specific tuning to work with the stock fuel setting
• The format of muffler tailored according to the specific engine model in order to boost the torque and maximum power rating while complying with European Standards _97/24/EC dated June 17, 1997)
• NOTE: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carbureted motorcycle. It is recommended that new exhaust gaskets and a Power Commander be installed when changing an exhaust system on a fuel-injected motorcycle
• Please Note: The image displayed is representative of the item, but may vary depending on your specific model
• DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is caused by the tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing.
• DISCLAIMER: Emission-related parts for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not alter the performance of OEM emission-related devices are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket emission-related parts that remove or alter OEM emission control devices unless certified by CARB, other than for closed circuit race use only. More California exhaust information is available at www.arb.ca.gov/.
• DISCLAIMER: Aftermarket products, including but not limited to fuel/air controllers which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for street use in California unless they have been issued a CARB Executive Order. Aftermarket emissions related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed curcuit race use only. See manufacturer's information and state and local laws to determine what is authorized for your use on your vehicle.
• DISCLAIMER: Products shown may be designed, manufactured, intended and sold for closed curcuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws.
• DISCLAIMER: Products shown may not conform to federal, state or local noise regulations.
• DISCLAIMER: Check your applicable laws and manufacturer's publication(s) and/or website(s) for manufacturer's warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.