Get the right part fast by calling 1-866-931-6644, emailing us at sales@ridersdiscount.com.
Our VIP sales team has access to hundreds of thousands more parts than we carry online
Get the perfect part by calling 1-866-931-6644 or emailing us at sales@ridersdiscount.com.
Get the perfect part by calling 1-866-931-6644 or emailing us at sales@ridersdiscount.com.
Sort By
BMC Air Intake Filter Cleaner Kit With Detergent & Oil WA250-500
BMC Air Filter - Tools
Lowest Price:
$29.09
See Details
For the best in performance and protection, BMC recommends that their air filters be cleaned and re-oiled every 15,000. This cleaning kit includes a detergent specifically formulated to clean BMC filters and a low viscosity oil to allow maximum engine performance while retaining good particle absorption properties.
Permatex High Temperature Thread Sealant 50 ML 59235
Permatex - Tools
Lowest Price:
$17.95
See Details
OEM specified. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Won't shred or wear like Teflon tape. Parts may be repositioned up to 4 hours after application. Temperature range -65 degrees F to 400 degrees F (-54 degrees C to 204 degrees C). Contains PTFE.
Permatex High Strength Threadlocker Gel 5 Grams Red 27005
Permatex - Tools
Lowest Price:
$12.69
See Details
OEM specified. Gel formula provides "liquid-reliability' without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST pin-point applicator, the GEL SQUEEZE applicator, or the single-use pouch puts the Threadlocker right where you want it...on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special...
Permatex Steel Weld Epoxy 0.84 Ounces 84109
Permatex - Tools
Lowest Price:
$10.48
See Details
Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60 degrees F to 300 degrees F (-51 degrees C to 149 degrees C). Permanent strength up to 4500 PSI.
Permatex 5 Minute Gap Filling Epoxy 0.84 Ounces 84101
Permatex - Tools
Lowest Price:
$10.48
See Details
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60 degree F to 180 degrees F (-51 degrees C to 82 degrees C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.
Lowest Price:
$10.58
See Details
OEM specified. For dealership warranty requirements, Ultra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittent; resists auto and shop fluids and vibration.
Permatex Ultra Slick Engine Assembly Lube 4 Ounces 81950
Permatex - Tools
Lowest Price:
$11.12
See Details
Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra Slick adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants.
Permatex Penetrating Grade Threadlocker 6 ML Green 29000
Permatex - Tools
Lowest Price:
$13.25
See Details
OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2" (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
Permatex High Strength Threadlocker 36 ML Red 27140
Permatex - Tools
Lowest Price:
$39.50
See Details
OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S- 46163A, Type I, Grade K).
Permatex Medium Strength Threadlocker 36 ML Blue 24240
Permatex - Tools
Lowest Price:
$39.50
See Details
OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4' (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).
Permatex Cold Weld Bonding Compound 1 Ounce 2 Pack 14600
Permatex - Tools
Lowest Price:
$10.26
See Details
A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300 degrees F intermittent. Over 3,000 PSI shear strength on steel.
Permatex Dielectric Tune-Up Grease 3 Oucnes 22058
Permatex - Tools
Lowest Price:
$16.42
See Details
Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy igntion systems.
Permatex Valve Grinding Compound 3 Ounces 80037
Permatex - Tools
Lowest Price:
$9.37
See Details
Aids valve grinding and seating operations to remove burrs, surface defects, carbon, gum and corrosion. Can be used for lapping and grinding chromium. Mixes with water to form an easy-to-use paste.
Permatex Anti-Seize Lubricant 4 Ounces 80071
Permatex - Tools
Lowest Price:
$11.66
See Details
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60 degrees F to 1600 degrees F (-51 degrees C to 871 degrees C). Salt, corrosion and moisture resistant. Ideal for marine use. Non-aerosol verison mets Mil Spec #907E. Aerosol - Level 3*.
Permatex Anti-Seize Lubricant 1 Ounce 81343
Permatex - Tools
Lowest Price:
$8.37
See Details
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60 degrees F to 1600 degrees F (-51 degrees C to 871 degrees C). Salt, corrosion and moisture resistant. Ideal for marine use. Non-aerosol verison mets Mil Spec #907E. Aerosol - Level 3*.
Permatex Gasket Remover Low VOC Formula 4 Ounces 80645
Permatex - Tools
Lowest Price:
$18.95
See Details
This low VOC formulation combines powerful gasket remover strength with an innovative delivery system. Its fast-foaming action penetrates the most stubborn or baked-on gaskets in 15-20 minutes. The built-in brush-tip was designed for easy application and allows for scrubbing on intricate surfaces. This product is NOT recommended for use on silicone gaskets. Level 2.
Permatex Spray-A-Gasket Hi-Temp Sealant 12 Ounces Copper 80697
Permatex - Tools
Lowest Price:
$14.87
See Details
Fast-drying, metallic copper sealant helps dissipate heat, prevents gasket burnout and improves heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -50 degrees F to 500 degrees F (-45 degrees C to 260 degrees C); resists all types of automotive fluids, expecially gasoline. Level 3.
Permatex The Right Stuff Gasket Maker 7.5 Ounces 85224
Permatex - Tools
Lowest Price:
$43.39
See Details
Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric "formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75 degrees F to...
Lowest Price:
$11.66
See Details
OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RVT silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -65 degrees F to 700 degrees F (-54 degrees C to 371 degrees C) intermittent; resists auto and shop fluids and vibration.
Permatex Anaerobic Gasket Maker 50 ML 51813
Permatex - Tools
Lowest Price:
$19.95
See Details
OEM specified. Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service. Old gasket material can be removed in minutes with a simple putty knife.
Permatex High Tack Spray-A-Gasket Sealant 4 Ounces 80064
Permatex - Tools
Lowest Price:
$12.25
See Details
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane. Aerosol level 3.
Permatex High Tack Gasket Sealant 4 Ounces 80062
Permatex - Tools
Lowest Price:
$10.37
See Details
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.
Permatex High Temperature Thread Sealant 6 ML 59214
Permatex - Tools
Lowest Price:
$8.49
See Details
OEM specified. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Wont shred or wear like Teflon tape. Parts may be repositioned up to 4 hours after application. Temperature range -65 degrees F to 400 degrees F (-54 degrees C to 204 degrees C). Contains PTFE.
Permatex High-Temp RVT Silicone Gasket Maker 3 Ounces Red 81160
Permatex - Tools
Lowest Price:
$11.47
See Details
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65 degrees F to 650 degrees F (-54 degrees C to 343 degrees C) intermittent; resists auto and shop fluids.
